K
karonbill
Guest
Are you getting ready to take the DELL EMC DEE-1111 exam? Passcert has just released the most up-to-date DEE-1111 Expert – PowerMax and VMAX All Flash Solutions Exam Dumps that are designed to assist you in effortlessly passing your exam. Our DEE-1111 exam dumps are meticulously crafted to provide you with all the necessary knowledge and skills needed to succeed in the DEE-1111 exam. With our comprehensive and reliable DEE-1111 Expert – PowerMax and VMAX All Flash Solutions Exam Dumps, you can confidently approach the exam and increase your chances of achieving a favorable outcome. Don't miss out on this opportunity to enhance your exam preparation and secure your success in the DEE-1111 exam.
Duration: 90 Minutes
Number of Questions: 54 Questions
Passing Score: 60%
Part 2:
Duration: 30 Minutes
Number of Questions: 6 Simulations
Passing Score: 66%
A passing score is required on both parts of this exam.
Identify and explain PowerMax and VMAX All Flash array configuration best practices for optimal performance
Identify performance analysis methodology and relate performance measurements to I/O operations
Identify workload profiles and characterization and the implications of Little's Law
Perform performance-related administration tasks: Monitor the performance of PowerMax and VMAX All Flash arrays, manage performance reports, and load data into offline performance viewer
Performance analysis of frontend directors: Identify relevant metrics, investigate, and solve performance issues
Performance analysis of cache and backend directors: Identify relevant metrics, investigate, and solve performance issues
Identify and describe TimeFinder SnapVX and SRDF performance considerations
Describe how data that resides on the PowerMax and VMAX All Flash arrays can be secured using Data at Rest Encryption (D@RE) and how this impacts system operations and management
Plan, implement, and manage user authentication and role-based permissions for Solutions Enabler and Unisphere for PowerMax
Plan, implement, and manage host-based access controls for PowerMax and VMAX All Flash arrays
Describe dual personality RDF devices and configure Concurrent SRDF, Cascaded SRDF, and R22 devices
Identify and describe the SRDF technologies that support SRDF/Star - SRDF/S consistency, SRDF/A multi-session consistency, and special SDDF and SRDF features
Describe Concurrent and Cascaded SRDF/Star failure scenarios and manage operations under normal and fault conditions
Implement SRDF/Metro
Explain SRDF/Metro device access operations
Describe SRDF/Metro Smart DR and its benefits
Perform Metro-based mode Non-Disruptive Migration when using Unisphere for PowerMax and/or using the SYMCLI
Perform Non-Disruptive Migration when using Unisphere for VMAX and/or using the SYMCLI
AReqs/sec and IOPS
BBalance and Reqs/sec
CIOPS and Utilization
D%Busy and Balance
Answer: D
2. An administrator has added custom SSL certificates. Each time a client connection is made, default certificates are used.
Which step must be completed?
A.manage server cert update
B.restart storsrvd
C.security_cert_allow wildcards
D.svmcfq discover
Answer: B
3. SRDF/Metro is deployed in a clustered host configuration. The RDF link state is partitioned, and the R1 side has full read/write capability to the application.
What is the state of the R2 device?
A.Goes Not Ready to the host
B.Has only read capability to the application
C.Bias is applied
D.Has full read/write capability to the application
Answer: D
4. A company has two PowerMax arrays located 100 km apart. The arrays are configured with SRDF/S over Fibre Channel.
Which Dell EMC technology improves FC replication between sites?
A.Fast Write
B.SIRT
C.Write Acceleration
D.Deduplication
Answer: A
5. An application owner is experiencing performance issues for their application. Unisphere for PowerMax is showing the storage group is compliant with the current Service Level.
How should the performance issue be addressed?
A.Redistribute the application to other front-end host ports on different directors
B.Adjust the Service Level to a lower level of service
C.Adjust the Service Level to a higher level of service
D.Redistribute the application to other front-end host ports on the same directors
Answer: A
6. An administrator implemented SYMACLs on a PowerMax using host-based Access IDs. The administrator is no longer able to run SYMCLI commands against the volumes belonging to a host.
What is a possible reason for this issue?
A.The disks the volumes were on were replaced
B.Host network interface card was replaced
C.SYMAPI options file was manually modified with the wrong host ID.
D.symacl —unique —passphrase was run using a different passphrase
Answer: C
DEE-1111 Expert – PowerMax and VMAX All Flash Solutions Exam
The Dell EMC PowerMax and VMAX All Flash Solutions Expert certification is mainly targeted to those candidates who want to build their career in PowerMax and VMAX All Flash domain. The Dell EMC Certified Expert - PowerMax and VMAX All Flash Solutions exam verifies that the candidate possesses the fundamental knowledge and proven skills in the area of Dell EMC DCE. This exam assesses the knowledge and skills required to analyze and understand the performance of PowerMax and VMAX All Flash arrays, articulate PowerMax and VMAX All Flash Security Concepts, use SRDF for three-site remote replication and Metro solutions and Non-disruptive migrations to PowerMax and VMAX All Flash arrays.EMC DEE-1111 Exam Information
Part 1:Duration: 90 Minutes
Number of Questions: 54 Questions
Passing Score: 60%
Part 2:
Duration: 30 Minutes
Number of Questions: 6 Simulations
Passing Score: 66%
A passing score is required on both parts of this exam.
DEE-1111 Exam Topics
PowerMax and VMAX All Flash Performance Workshop (39%)
Describe the architecture of the PowerMax and VMAX All Flash arrays from a performance perspectiveIdentify and explain PowerMax and VMAX All Flash array configuration best practices for optimal performance
Identify performance analysis methodology and relate performance measurements to I/O operations
Identify workload profiles and characterization and the implications of Little's Law
Perform performance-related administration tasks: Monitor the performance of PowerMax and VMAX All Flash arrays, manage performance reports, and load data into offline performance viewer
Performance analysis of frontend directors: Identify relevant metrics, investigate, and solve performance issues
Performance analysis of cache and backend directors: Identify relevant metrics, investigate, and solve performance issues
Identify and describe TimeFinder SnapVX and SRDF performance considerations
PowerMax and VMAX All Flash Security Concepts (18%)
Describe how exposure to data security vulnerabilities and the prevention of unauthorized change control operations are addressed in PowerMax and VMAX All Flash arraysDescribe how data that resides on the PowerMax and VMAX All Flash arrays can be secured using Data at Rest Encryption (D@RE) and how this impacts system operations and management
Plan, implement, and manage user authentication and role-based permissions for Solutions Enabler and Unisphere for PowerMax
Plan, implement, and manage host-based access controls for PowerMax and VMAX All Flash arrays
PowerMax and VMAX All Flash Multi-site SRDF Solutions (20%)
Provide an overview of multi-site SRDF solutionsDescribe dual personality RDF devices and configure Concurrent SRDF, Cascaded SRDF, and R22 devices
Identify and describe the SRDF technologies that support SRDF/Star - SRDF/S consistency, SRDF/A multi-session consistency, and special SDDF and SRDF features
Describe Concurrent and Cascaded SRDF/Star failure scenarios and manage operations under normal and fault conditions
PowerMax and VMAX All Flash SRDF/Metro Solutions (13%)
Describe SRDF/Metro and its benefitsImplement SRDF/Metro
Explain SRDF/Metro device access operations
Describe SRDF/Metro Smart DR and its benefits
Non-Disruptive Migration (NDM) to PowerMax and VMAX Family (10%)
Describe Non-Disruptive Migration from VMAX to a PowerMax or VMAX All Flash arrayPerform Metro-based mode Non-Disruptive Migration when using Unisphere for PowerMax and/or using the SYMCLI
Perform Non-Disruptive Migration when using Unisphere for VMAX and/or using the SYMCLI
Share Expert – PowerMax and VMAX All Flash Solutions DEE-1111 Free Dumps
1. Which KPIs should be reviewed when analyzing BE performance using the PowerMax array?AReqs/sec and IOPS
BBalance and Reqs/sec
CIOPS and Utilization
D%Busy and Balance
Answer: D
2. An administrator has added custom SSL certificates. Each time a client connection is made, default certificates are used.
Which step must be completed?
A.manage server cert update
B.restart storsrvd
C.security_cert_allow wildcards
D.svmcfq discover
Answer: B
3. SRDF/Metro is deployed in a clustered host configuration. The RDF link state is partitioned, and the R1 side has full read/write capability to the application.
What is the state of the R2 device?
A.Goes Not Ready to the host
B.Has only read capability to the application
C.Bias is applied
D.Has full read/write capability to the application
Answer: D
4. A company has two PowerMax arrays located 100 km apart. The arrays are configured with SRDF/S over Fibre Channel.
Which Dell EMC technology improves FC replication between sites?
A.Fast Write
B.SIRT
C.Write Acceleration
D.Deduplication
Answer: A
5. An application owner is experiencing performance issues for their application. Unisphere for PowerMax is showing the storage group is compliant with the current Service Level.
How should the performance issue be addressed?
A.Redistribute the application to other front-end host ports on different directors
B.Adjust the Service Level to a lower level of service
C.Adjust the Service Level to a higher level of service
D.Redistribute the application to other front-end host ports on the same directors
Answer: A
6. An administrator implemented SYMACLs on a PowerMax using host-based Access IDs. The administrator is no longer able to run SYMCLI commands against the volumes belonging to a host.
What is a possible reason for this issue?
A.The disks the volumes were on were replaced
B.Host network interface card was replaced
C.SYMAPI options file was manually modified with the wrong host ID.
D.symacl —unique —passphrase was run using a different passphrase
Answer: C